Hvrp Features Supported By The S7700 - Huawei Quidway S7700 Configuration Manual - Ethernet

Smart routing switch
Hide thumbs Also See for Quidway S7700:
Table of Contents

Advertisement

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
l

12.2 HVRP Features Supported by the S7700

This section describes the HVRP features supported by the S7700.
Working Mechanism of HVRP
Through the dynamic VLAN registration and aging mechanism, HVRP ages the VLANs on the
interfaces that do not forward packets and saves only necessary VLANs. When a VLAN contains
0 to 2 interfaces, the interfaces do not learn MAC addresses. When the VLAN contains two
interfaces, data packets are broadcast on the VLAN and no extra network bandwidth is
consumed.
Figure 12-1
based on this networking.
l
l
l
Figure 12-1 Networking diagram of HVRP
Issue 01 (2011-07-15)
Aging timer of registered VLANs
The aging timer of registered VLAN specifies the aging time of registered VLANs. If the
HVRP designated interface does not receive the registration packet of a VLAN within the
aging time, the VLAN is aged on the HVRP designated interface.
shows the networking of HVRP. The working mechanism of HVRP is described
STP is enabled on the entire network, and the HVRRP root interface and HVRRP
designated interfaces are calculated through STP.
The Switches are connected through trunk interfaces. The trunk interfaces are all enabled
with HVRP and can forward packets of VLAN 101 to VLAN 500.
HVRRP is disabled on the interfaces outside the STP network, that is, edge interfaces.
VLAN:301-400
VLAN:101-200
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ME60
VLAN:101-500
SwitchA
SwitchC
SwitchB
SwitchD
SwitchE
12 HVRP Configuration
VLAN:401-500
VLAN:201-300
612

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quidway s9300

Table of Contents