Huawei Quidway S7700 Configuration Manual - Ethernet page 165

Smart routing switch
Hide thumbs Also See for Quidway S7700:
Table of Contents

Advertisement

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
a common VLAN without changing the priority of the flow. GigabitEthernet1/0/1 needs to be
automatically added to or deleted from the voice VLAN.
Figure 3-21 Networking diagram of a voice VLAN in auto mode
HSI
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
6.
7.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Issue 01 (2011-07-15)
DHCP Server
Internet
Switch
GE1/0/1
LAN Switch
VoIP
IPTV
Create VLANs.
Configure the link type and default VLAN of the interface.
Enable the voice VLAN on the interface.
Set the mode of adding the interface to the voice VLAN to auto.
Set the OUI of the voice VLAN.
Set the aging time of the voice VLAN.
Set the working mode of the voice VLAN.
Voice VLAN and VLAN through which the IP phone applies for an IP address: VLAN 2
and VLAN 6
OUI and mask: 0011-2200-0000 and ffff-ff00-0000
Aging time of the voice VLAN: 100 minutes
Default VLAN of GigabitEthernet1/0/1: VLAN 6
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 VLAN Configuration
148

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quidway s9300

Table of Contents