Huawei Quidway S7700 Configuration Manual - Ethernet page 338

Smart routing switch
Hide thumbs Also See for Quidway S7700:
Table of Contents

Advertisement

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
Take the display on PE1 and CE1 as an example.
[PE1] display ip vpn-instance verbose
Total VPN-Instances configured : 2
VPN-Instance Name and ID : vpna, 1
Create date : 2008/11/24 16:28:27
Up time : 0 days, 00 hours, 11 minutes and 25 seconds
Route Distinguisher : 100:1
Export VPN Targets :
Import VPN Targets :
Label policy : label per route
The diffserv-mode Information is : uniform
The ttl-mode Information is : pipe
Interfaces : Vlanif10
VPN-Instance Name and ID : vpnb, 2
Create date : 2008/11/24 16:30:37
Up time : 0 days, 00 hours, 09 minutes and 15 seconds
Route Distinguisher : 100:2
Export VPN Targets :
Import VPN Targets :
Label policy : label per route
The diffserv-mode Information is : uniform
The ttl-mode Information is : pipe
Interfaces : Vlanif20
[PE1] ping -vpn-instance vpna 10.1.1.1
PING 10.1.1.1: 56
--- 10.1.1.1 ping statistics ---
Step 5 Set up EBGP peer relations between PEs and CEs to import VPN routes.
# Configure CE1.
[CE1] bgp 65410
[CE1-bgp] peer 10.1.1.2 as-number 100
[CE1-bgp] import-route direct
# Configure PE1.
[PE1] bgp 100
[PE1-bgp] ipv4-family vpn-instance vpna
[PE1-bgp-vpna] peer 10.1.1.1 as-number 65410
[PE1-bgp-vpna] import-route direct
[PE1-bgp-vpna] quit
[PE1-bgp] ipv4-family vpn-instance vpnb
[PE1-bgp-vpnb] peer 10.2.1.1 as-number 65420
[PE1-bgp-vpnb] import-route direct
[PE1-bgp-vpnb] quit
Issue 01 (2011-07-15)
data bytes, press CTRL_C to break
Reply from 10.1.1.1: bytes=56 Sequence=1 ttl=255 time=5 ms
Reply from 10.1.1.1: bytes=56 Sequence=2 ttl=255 time=3 ms
Reply from 10.1.1.1: bytes=56 Sequence=3 ttl=255 time=3 ms
Reply from 10.1.1.1: bytes=56 Sequence=4 ttl=255 time=3 ms
Reply from 10.1.1.1: bytes=56 Sequence=5 ttl=255 time=16 ms
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 3/6/16 ms
NOTE
The configurations of CE2, CE3 and CE4 are similar to the configuration of CE1, and are not mentioned
here.
NOTE
The configuration of PE2 is similar to the configuration of PE1, and is not mentioned here.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
111:1
111:1
222:2
222:2
5 QinQ Configuration
321

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quidway s9300

Table of Contents