Example For Configuring The Mux Vlan - Huawei Quidway S7700 Configuration Manual - Ethernet

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
port link-type access
port default vlan 3
#
return

3.12.11 Example for Configuring the MUX VLAN

MUX VLAN isolates Layer 2 traffic of different interfaces in a VLAN. It allows some employee
users of an enterprise to communicate with each other and isolates some employee users from
each other.
Networking Requirements
In an enterprise network, all employees of the enterprise can access the enterprise's server. It is
required that some employees be able to communicate with each other, whereas some employees
not communicate with each other.
As shown in
the enterprise's server. It is required that some employees be able to communicate with each
other, whereas some employees not communicate with each other.
For an enterprise with a large number of employees, each employee that is prohibited from
communicating with another needs to be added to a separate VLAN if the preceding scheme is
used. This wastes VLAN ID resources and imposes an additional configuration workload on the
network administrator.
Configuring a MUX VLAN on the switch connected to PCs helps to save VLAN ID resources,
reduce the configuration workload of the network administrator, and facilitate network
maintenance.
Figure 3-20 Typical networking of MUX VLAN configuration
HostB HostC
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Issue 01 (2011-07-15)
Figure 3-20,in an enterprise network, all employees of the enterprise can access
Switch
GE1/0/2
GE1/0/3 GE1/0/4
VLAN 3
Configure the MUX VLAN.
Configure the group VLAN.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/5
HostD HostE
VLAN 4
3 VLAN Configuration
GE1/0/1
HostA
VLAN 2
145