Huawei Quidway S7700 Configuration Manual - Ethernet page 304

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
Figure 5-14 Networking diagram for configuring Martini VPLS
GE1/0/0
GE2/0/0
GE1/0/0
GE1/0/0
Switch
PE1
PE2
P
CE1
CE2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Issue 01 (2011-07-15)
Loopback1
1.1.1.9/32
GE2/0/0
PE1
GE1/0/0
Switch1
CE1
Interface
GigabitEthernet1/0/0
GigabitEthernet2/0/0
Loopback1
GigabitEthernet1/0/0
GigabitEthernet2/0/0
Loopback1
GigabitEthernet1/0/0
GigabitEthernet2/0/0
Loopback1
GigabitEthernet1/0/0
GigabitEthernet1/0/0
Configure the routing protocol on the backbone network to implement interworking.
Set up a remote LDP session between the PEs.
Set up a tunnel between the PEs to transmit user data.
Enable MPLS L2VPN on the PEs.
Create VSIs on PEs, specify LDP as the signaling protocol, and bind the VSI to related AC
interfaces.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Loopback1 Loopback1
2.2.2.9/32
GE2/0/0
GE1/0/0
P
Switch2
VLANIF interface
GigabitEthernet1/0/0.1
VLANIF 20
-
VLANIF 30
GigabitEthernet2/0/0.1
-
VLANIF 20
VLANIF 30
-
VLANIF 10
VLANIF 10
5 QinQ Configuration
3.3.3.9/32
PE2
GE2/0/0
GE2/0/0
GE1/0/0
GE1/0/0
CE2
IP address
-
168.1.1.1/24
1.1.1.9/32
169.1.1.2/24
-
3.3.3.9/32
168.1.1.2/24
169.1.1.1/24
2.2.2.9/32
10.1.1.1/24
10.1.1.2/24
287