Huawei Quidway S7700 Configuration Manual - Ethernet page 75

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
----End
Configuration Files
l
l
Issue 01 (2011-07-15)
Type ID LocalPhyState
Eth-Trunk 10 Up
# Check information about E-Trunk1 on PE2.
<PE2> display e-trunk 1
The E-Trunk information
E-TRUNK-ID
Priority
Peer-IP
State
Send-Period (100ms)
Receive
RecDrop
Peer-Priority
Peer-Fail-Time (100ms) : 27
-------------------------------------------------------------------------------
-
The Member information
Type ID LocalPhyState
Eth-Trunk 10 Down
The preceding information shows that the E-Trunk priority on PE1 is 10, and the E-Trunk
status is Master; the E-Trunk priority on PE2 is 20, and the E-Trunk status is Backup. Link
backup is implemented.
Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Eth-Trunk20
port link-type trunk
port trunk allow-pass vlan 10
mode lacp-static
#
interface GigabitEthernet1/0/1
eth-trunk 20
#
interface GigabitEthernet1/0/2
eth-trunk 20
#
interface GigabitEthernet1/0/3
eth-trunk 20
#
interface GigabitEthernet1/0/4
eth-trunk 20
#
return
Configuration file of PE1
#
sysname PE1
#
vlan batch 100
#
e-trunk 1
#
lacp e-trunk system-id 00e0-fc00-0000
lacp e-trunk priority 1
#
e-trunk 1
priority 10
peer-address 2.2.2.9 source-address 1.1.1.9
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Work-Mode
auto
: 1 Revert-Delay-Time (s) : 120
: 20 System-ID
: 1.1.1.9 Source-IP
: Backup Causation
: 9 Fail-Time (100ms)
: 43 Send
: 3 SndDrop
: 10 Peer-System-ID
BFD-Session
Work-Mode
auto
2 Link Aggregation Configuration
State Causation
Master PEER_MEMBER_DOWN
: 00e0-3b6c-6100
: 2.2.2.9
: PRI
: 27
: 42
: 0
: 00e0-0f74-eb00
: 2
State Causation
Backup PEER_MEMBER_UP
58