Huawei Quidway S7700 Configuration Manual - Ethernet page 357
Smart routing switch
Hide thumbs
Also See for Quidway S7700:
- Configuration manual (833 pages) ,
- Configuration manual - multicast (551 pages) ,
- Hardware description (205 pages)
Table of Contents
Advertisement
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
[SwitchC-GigabitEthernet1/0/1] port trunk allow-pass vlan all
[SwitchC-GigabitEthernet1/0/1] quit
[SwitchC] interface gigabitethernet 1/0/2
[SwitchC-GigabitEthernet1/0/2] port link-type trunk
[SwitchC-GigabitEthernet1/0/2] port trunk allow-pass vlan all
[SwitchC-GigabitEthernet1/0/2] quit
# Enable GVRP on the interfaces and set the registration modes of the interfaces.
[SwitchC] interface gigabitethernet 1/0/1
[SwitchC-GigabitEthernet1/0/1] gvrp
[SwitchC-GigabitEthernet1/0/1] gvrp registration fixed
[SwitchC-GigabitEthernet1/0/1] quit
[SwitchC] interface gigabitethernet 1/0/2
[SwitchC-GigabitEthernet1/0/2] gvrp
[SwitchC-GigabitEthernet1/0/2] gvrp registration normal
[SwitchC-GigabitEthernet1/0/2] quit
Step 3 Verify the configuration.
After the configuration is complete, the branch of company A can communicate with the
headquarters, and users of company A in VLAN 101 to VLAN 200 can communicate with users
in company B.
Run the display gvrp status command on Switch A to check whether GVRP is enabled globally.
The following information is displayed:
<SwitchA> display gvrp status
GVRP is enabled
Run the display gvrp statistics command on Switch A to view statistics about GVRP on GVRP
interfaces, including the GVRP state of each interface, number of GVRP registration failures,
source MAC address of the last GVRP PDU, and registration type of each interface.
<SwitchA> display gvrp statistics
GVRP statistics on port GigabitEthernet1/0/1
GVRP status
GVRP registrations failed
GVRP last PDU origin
GVRP registration type
GVRP statistics on port GigabitEthernet1/0/2
GVRP status
GVRP registrations failed
GVRP last PDU origin
GVRP registration type
Verify the configurations of Switch B and Switch C in the same way.
----End
Configuration Files
l
#
sysname SwitchA
#
gvrp
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk allow-pass vlan 2 to 4094
gvrp
#
interface GigabitEthernet1/0/2
port link-type trunk
Issue 01 (2011-07-15)
Configuration file of Switch A
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: Enabled
: 0
: 0000-0000-0000
: Normal
: Enabled
: 0
: 0000-0000-0000
: Normal
6 GVRP Configuration
340
Advertisement
Table of Contents
