Huawei Quidway S7700 Configuration Manual - Ethernet page 561

Smart routing switch
Hide thumbs Also See for Quidway S7700:
Table of Contents

Advertisement

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
l
Procedure
Step 1 Configure basic SEP functions.
1.
2.
Issue 01 (2011-07-15)
(5) Configure the topology change notification function so that the upper-layer network
running MSTP can be notified of topology changes in the SEP segment.
Configure basic MSTP functions.
(1) Add PE1 to PE4 to an MST region RG1.
(2) Create VLANs on PE1 to PE4 and add interfaces on the STP ring to the VLANs.
(3) Configure PE3 as the root bridge and PE4 as the backup root bridge.
Configure the Layer 2 forwarding function on CE1 and LSW1 to LSW3.
SEP segment ID
Control VLAN of the SEP segment
Port roles in the SEP segment
Preemption mode
Method of selecting the port to block
MST region name, MSTI ID, and priorities of the PEs in the region
Configure SEP segment 1 on LSW1 to LSW5 and configure VLAN 10 as the control VLAN
of SEP segment 1.
# Configure LSW1.
<Quidway> system-view
[Quidway] sysname LSW1
[LSW1] sep segment 1
[LSW1-sep-segment1] control-vlan 10
[LSW1-sep-segment1] protected-instance all
[LSW1-sep-segment1] quit
# Configure LSW2.
<Quidway> system-view
[Quidway] sysname LSW2
[LSW2] sep segment 1
[LSW2-sep-segment1] control-vlan 10
[LSW2-sep-segment1] protected-instance all
[LSW2-sep-segment1] quit
# Configure LSW3.
<Quidway> system-view
[Quidway] sysname LSW3
[LSW3] sep segment 1
[LSW3-sep-segment1] control-vlan 10
[LSW3-sep-segment1] protected-instance all
[LSW3-sep-segment1] quit
NOTE
l The control VLAN must be a VLAN that has not been created or used, but the configuration file
automatically displays the command for creating the VLAN.
l Each SEP segment must be configured with a control VLAN. After an interface is added to the
SEP segment configured with a control VLAN, the interface is automatically added to the control
VLAN.
Add LSW1 to LSW3 to SEP segment 1 and configure port roles.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 SEP Configuration
544

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quidway s9300

Table of Contents