Huawei Quidway S7700 Configuration Manual - Ethernet page 201

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Create VLANs on the Switches.
# Create VLAN 100 on SwitchA.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan 100
# Create VLAN 200 on SwitchB.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] vlan 200
# Create VLAN 300 on SwitchC.
<Quidway> system-view
[Quidway] sysname SwitchC
[SwitchC] vlan 300
# Create VLAN 300 on SwitchD.
<Quidway> system-view
[Quidway] sysname SwitchD
[SwitchD] vlan 300
Step 2 Add interfaces to VLANs.
# Add GE 1/0/1 of SwitchA to VLAN 100.
[SwitchA] interface gigabitethernet 1/0/1
[SwitchA-GigabitEthernet1/0/1] port link-type trunk
[SwitchA-GigabitEthernet1/0/1] port trunk allow-pass vlan 100
# Add GE 1/0/2 of SwitchB to VLAN 200.
[SwitchB] interface gigabitethernet 1/0/2
[SwitchB-GigabitEthernet1/0/2] port link-type trunk
[SwitchB-GigabitEthernet1/0/2] port trunk allow-pass vlan 200
# Add GE 1/0/1 of SwitchC to VLAN 300.
[SwitchC] interface gigabitethernet 1/0/1
[SwitchC-GigabitEthernet1/0/1] port link-type trunk
[SwitchC-GigabitEthernet1/0/1] port trunk allow-pass vlan 300
# Add GE 1/0/2 on SwitchD to VLAN 300.
[SwitchD] interface gigabitethernet 1/0/2
[SwitchD-GigabitEthernet1/0/2] port link-type trunk
[SwitchD-GigabitEthernet1/0/2] port trunk allow-pass vlan 300
Issue 01 (2011-07-15)
Configure flow-based VLAN mapping of double tags on GE 1/0/1 of SwitchA.
Configure flow-based VLAN mapping of double tags on GE 1/0/2 of SwitchB.
VLAN to be created on SwitchA: VLAN 100
VLAN to be created on SwitchB: VLAN 200
VLAN to be created on SwitchC and SwitchD: VLAN 300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VLAN Mapping Configuration
184