Huawei Quidway S7700 Configuration Manual - Ethernet page 395

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
Figure 7-10 Networking diagram for MAC address anti-flapping
VLAN10
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Create a VLAN and add interfaces to the VLAN.
# Add GigabitEthernet1/0/1 and GigabitEthernet1/0/2 to VLAN 10.
<Quidway> system-view
[Quidway] vlan 10
[Quidway–vlan10] quit
[Quidway] interface gigabitethernet 1/0/2
[Quidway-GigabitEthernet1/0/2] port link-type trunk
[Quidway-GigabitEthernet1/0/2] port trunk allow-pass vlan 10
[Quidway-GigabitEthernet1/0/2] quit
Issue 01 (2011-07-15)
Server
MAC:11-22-33
GE1/0/1 VLAN 10
Switch
GE1/0/2
LSW
PC1 PC2
Create a VLAN and add interfaces to the VLAN.
Configure MAC address anti-flapping on the server-side interface.
VLAN that the server-side and user-side interfaces belong to: VLAN 10
Server-side interface: GigabitEthernet1/0/1
User-side interface: GigabitEthernet1/0/2
MAC address learning priority of the server-side interface: 2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PC4
MAC:11-22-33
PC3
7 MAC Address Table Configuration
378