Huawei Quidway S7700 Configuration Manual - Ethernet page 243

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
l
l
l
l
l
Procedure
Step 1 Configure selective QinQ.
# Create VLANs.
<Quidway> system-view
[Quidway] vlan batch 10 20
# Add related interfaces to the VLANs.
[Quidway] interface gigabitethernet 1/0/0
[Quidway-GigabitEthernet1/0/0] port hybrid untagged vlan 10 20
[Quidway-GigabitEthernet1/0/0] quit
[Quidway] interface gigabitethernet 2/0/0
[Quidway-GigabitEthernet2/0/0] port hybrid untagged vlan 10 20
[Quidway-GigabitEthernet2/0/0] quit
[Quidway] interface gigabitethernet 3/0/0
[Quidway-GigabitEthernet3/0/0] port hybrid tagged vlan 10
[Quidway-GigabitEthernet3/0/0] quit
[Quidway] interface gigabitethernet 4/0/0
[Quidway-GigabitEthernet4/0/0] port hybrid tagged vlan 20
[Quidway-GigabitEthernet4/0/0] quit
# Configure selective QinQ on GE 1/0/0 and GE 2/0/0.
[Quidway] interface gigabitethernet 1/0/0
[Quidway-GigabitEthernet1/0/0] port vlan-stacking vlan 100 to 999 stack-vlan 10
[Quidway-GigabitEthernet1/0/0] port vlan-stacking vlan 1000 to 1999 stack-vlan 20
[Quidway-GigabitEthernet1/0/0] quit
[Quidway] interface gigabitethernet 2/0/0
[Quidway-GigabitEthernet2/0/0] port vlan-stacking vlan 100 to 999 stack-vlan 10
[Quidway-GigabitEthernet2/0/0] port vlan-stacking vlan 1000 to 1999 stack-vlan 20
[Quidway-GigabitEthernet2/0/0] quit
Step 2 Configure a traffic policy.
# Configure an ACL to filter packets based on source MAC addresses.
<Quidway> system-view
[Quidway] acl number 4001
[Quidway-acl-L2-4001] rule 1 permit source-mac 00e0-8e00-0000 ffff-f
f00-0000
[Quidway-acl-L2-4001] rule 100 deny
[Quidway-acl-L2-4001] quit
# Configure a traffic classifier.
[Quidway] traffic classifier STB operator and
[Quidway-classifier-STB] if-match vlan-id 20
[Quidway-classifier-STB] if-match acl 4001
[Quidway-classifier-STB] quit
# Configure a traffic behavior.
[Quidway] traffic behavior PermitMAC
[Quidway-behavior-PermitMAC] quit
Issue 01 (2011-07-15)
VLAN to which GE 4/0/0 of the Switch needs to be added: VLAN 20 (in tagged mode)
MAC address segments of STBs: 00e0-8e00-0000 ffff-ff00-0000
Traffic classifier: for STB, filtering packets based on VLAN IDs and source MAC
addresses, that is, forwarding packets with the specified MAC address and VLAN ID
Traffic behavior: PermitMAC, using the default action permit
Traffic policy: PermitMAC, containing the preceding traffic classifier and traffic behavior
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 QinQ Configuration
226