Setting The Interface Type; Adding An Interface To The Outer Vlan - Huawei Quidway S7700 Configuration Manual - Ethernet

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
Applicable Environment
The S7700 forwards packets according to the outer VLAN tags of packets and distinguishes
packets of different services according to the inner tags of packets. Therefore, an untagged packet
must be added double VLAN tags.
Pre-configuration Tasks
None.
Data Preparation
To add double VLAN tags to untagged packets, you need to the following data.
No.
1
2

5.8.2 Setting the Interface Type

Context
Do as follows on the S7700 that needs to add double VLAN tags to untagged packets.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
port link-type hybrid
The type of the interface is set to hybrid.
By default, the interface type is hybrid.
Only a hybrid or trunk interface can add double VLAN tags to untagged packets.
----End

5.8.3 Adding an Interface to the Outer VLAN

Issue 01 (2011-07-15)
Data
Interface number
Inner VLAN ID and outer VLAN ID
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 QinQ Configuration
203