Huawei Quidway S7700 Configuration Manual - Ethernet page 486
Smart routing switch
Hide thumbs
Also See for Quidway S7700:
- Configuration manual (833 pages) ,
- Configuration manual - multicast (551 pages) ,
- Hardware description (205 pages)
Table of Contents
Advertisement
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
[PE2] vsi a2 static
[PE2-vsi-a2] pwsignal ldp
[PE2-vsi-a2-ldp] vsi-id 2
[PE2-vsi-a2-ldp] peer 1.1.1.1
[PE2-vsi-a2-ldp] peer 3.3.3.3
[PE2-vsi-a2-ldp] peer 4.4.4.4
Configurations of PE3 and PE3 are similar to configurations of PE1 and PE2, and are not
mentioned.
Step 7 Bind the VSI to interfaces on the PEs.
# Configure PE1.
[PE1] interface gigabitethernet 1/0/0.1
[PE1-GigabitEthernet1/0/0.1] control-vid 1000 dot1q-termination
[PE1-GigabitEthernet1/0/0.1] dot1q termination vid 100
[PE1-GigabitEthernet1/0/0.1] l2 binding vsi a2
[PE1-GigabitEthernet1/0/0.1] quit
# Configure PE2.
[PE2] interface gigabitethernet 1/0/0.1
[PE2-GigabitEthernet1/0/0.1] control-vid 1000 dot1q-termination
[PE2-GigabitEthernet1/0/0.1] dot1q termination vid 100
[PE2-GigabitEthernet1/0/0.1] l2 binding vsi a2
[PE2-GigabitEthernet1/0/0.1] quit
# Configure PE3.
[PE3] interface gigabitethernet 1/0/0.1
[PE3-GigabitEthernet1/0/0.1] control-vid 1000 dot1q-termination
[PE3-GigabitEthernet1/0/0.1] dot1q termination vid 100
[PE3-GigabitEthernet1/0/0.1] l2 binding vsi a2
[PE3-GigabitEthernet1/0/0.1] quit
# Configure PE4.
[PE4] interface gigabitethernet 1/0/0.1
[PE4-GigabitEthernet1/0/0.1] control-vid 1000 dot1q-termination
[PE4-GigabitEthernet1/0/0.1] dot1q termination vid 100
[PE4-GigabitEthernet1/0/0.1] l2 binding vsi a2
[PE4-GigabitEthernet1/0/0.1] quit
Step 8 Configure STP.
1.
Issue 01 (2011-07-15)
Configure the MST region and activate the region.
# Configure PE1.
[PE1] stp region-configuration
[PE1-mst-region] region-name RG1
[PE1-mst-region] active region-configuration
[PE1-mst-region] quit
# Configure PE4.
[PE4] stp region-configuration
[PE4-mst-region] region-name RG1
[PE4-mst-region] active region-configuration
[PE4-mst-region] quit
# Configure CE1.
[CE1] stp region-configuration
[CE1-mst-region] region-name RG1
[CE1-mst-region] active region-configuration
[CE1-mst-region] quit
# Configure PE2.
[PE2] stp region-configuration
[PE2-mst-region] region-name RG1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 MSTP Configuration
469
Advertisement
Table of Contents
