Specifying The Outer Vlan Id; Checking The Configuration; Configuring Selective Qinq; Establishing The Configuration Task - Huawei Quidway S7700 Configuration Manual - Ethernet

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet

5.3.3 Specifying the Outer VLAN ID

Context
Do as follows on the S7700 to be configured with interface QinQ.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN is created.
Step 3 Run:
quit
Return to the system view.
Step 4 Run:
interface interface-type interface-number
The interface view is displayed.
Step 5 Run:
port default vlan vlan-id
The VLAN ID (default VLAN) of the outer VLAN tag is set.
----End

5.3.4 Checking the Configuration

Procedure
l
----End

5.4 Configuring Selective QinQ

This section describes how to configure the interface type, the outer VLAN ID, and selective
QinQ.

5.4.1 Establishing the Configuration Task

Issue 01 (2011-07-15)
Run the display current-configuration interface interface-type interface-number
command to display the QinQ configuration on the interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 QinQ Configuration
192