Huawei Quidway S7700 Configuration Manual - Ethernet page 614
Smart routing switch
Hide thumbs
Also See for Quidway S7700:
- Configuration manual (833 pages) ,
- Configuration manual - multicast (551 pages) ,
- Hardware description (205 pages)
Table of Contents
Advertisement
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Enable STP on CEs and PEs.
# Configure CE1.
[CE1] stp enable
# Configure CE2.
[CE2] stp enable
# Configure CE3.
[CE3] stp enable
# Configure CE4.
[CE4] stp enable
Step 2 Configure CE1 and CE2 to send STP packets with VLAN tag 100 to PEs and configure CE3
and CE4 to send STP packets with VLAN tag 200 to PEs.
# Configure CE1.
[CE1] vlan 100
[CE1-vlan100] quit
[CE1] interface gigabitethernet 1/0/0
[CE1-GigabitEthernet1/0/0] port hybrid tagged vlan 100
[CE1-GigabitEthernet1/0/0] stp bpdu vlan 100
# Configure CE2.
[CE2] vlan 100
[CE2-vlan100] quit
[CE2] interface gigabitethernet 1/0/0
[CE2-GigabitEthernet1/0/0] port hybrid tagged vlan 100
[CE2-GigabitEthernet1/0/0] stp bpdu vlan 100
# Configure CE3.
[CE3] vlan 200
[CE3-vlan200] quit
Issue 01 (2011-07-15)
Enable STP on the CEs.
Configure CEs to send STP packets with specified VLAN tags to PEs.
Configure VLAN-based Layer 2 protocol transparent transmission on PEs.
Configure network-side interfaces of PEs to allow packets of VLAN 100 and VLAN 200
to pass.
Configure the Layer 2 forwarding function on the P device so that packets sent from PEs
can be transmitted on the backbone network.
VLAN tags in STP packets sent from CEs to PEs
IDs of the VLANs that interfaces of PEs and CEs belong to
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Layer 2 Protocol Transparent Transmission Configuration
597
Advertisement
Table of Contents
