Huawei Quidway S7700 Configuration Manual - Ethernet page 192

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
Figure 4-1 Networking diagram for configuring VLAN mapping of single VLAN tag
172.16.0.1/16 172.16.0.2/16 172.16.0.3/16
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Create VLANs on the Switches.
# Create VLAN 6 on SwitchA.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan 6
# Create VLAN 5 on SwitchB.
Issue 01 (2011-07-15)
SwitchC
GE1/0/1
SwitchA
GE1/0/1
VLAN6
GE3/0/1
Create VLANs on SwitchA, SwitchB, SwitchC, and SwitchD.
Add interfaces of SwitchA, SwitchB, SwitchC, and SwitchD to the corresponding VLANs.
Configure VLAN mapping of a single tag on GE 1/0/1 of SwitchA.
Configure VLAN mapping of a single tag on GE 2/0/2 of SwitchB.
VLAN to be created on SwitchA: VLAN 6
VLAN to be created on SwitchB: VLAN 5
VLAN to be created on SwitchC and SwitchD: VLAN 10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Network
VLAN10
GE3/0/1
GE3/0/2
172.16.0.5/16 172.16.0.6/16 172.16.0.7/16
4 VLAN Mapping Configuration
SwitchD
GE1/0/1
SwitchB
GE2/0/2
GE3/0/2
VLAN5
175