Assembling And Installing The Front Brake Master Cylinder - Yamaha XV1600A1999 Service Manual

FRONT AND REAR BRAKES
5. Check:
S brake hoses
S brake fluid reservoir hose
Cracks/damage/wear ! Replace.
EAS00598
ASSEMBLING
FRONT BRAKE MASTER CYLINDER
WARNING
S Before installation, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.
S Never use solvents on internal brake com-
ponents.
1. Install:
S brake master cylinder kit 1
S circlip 2
S dust boot 3
2. Install:
S front brake light switch 1
3. Install:
S brake master cylinder
S brake master cylinder holder 1
NOTE:
S Install the brake master cylinder holder with
the "UP" mark facing up.
S Align the end of the brake master cylinder
holder with the punch mark a in the handle-
bar.
S First, tighten the upper bolt, then the lower bolt.
4-37
CHAS
AND INSTALLING
Recommended brake fluid
DOT 4
New
10 Nm (1.0 mSkg)
THE