Assembling And Installing The Front Brake Master Cylinder - Yamaha YW125Y 2009 Service Manual

1
1
a
4
3
2
2
4-27
FRONT BRAKE
EAS00597
ASSEMBLING AND INSTALLING THE
FRONT BRAKE MASTER CYLINDER
WARNING
8 8 8 8 8 Before installation, all internal brake
components should be cleaned and lu-
bricated with clean or new brake fluid.
8 8 8 8 8 Never use solvents on internal brake
components.
Recommended brake fluid
DOT 4
1. Install:
8 brake master cylinder kit 1
8 washer 2
8 circlip 3
New
8 dust boot 4
2. Install:
8 brake master cylinder 1
8 brake master cylinder holder 2
9Nm (0.9m • kgf, 6.5ft • lbf)
TIP
8 Install the brake master cylinder holder with
the "UP" mark facing up.
8 Align the end of the brake master cylinder
holder with the punch mark a in the handle-
bar.
8 First, tighten the upper bolt, then the lower
bolt.
CHAS