Yamaha XV1600A1999 Service Manual page 137

FRONT WHEEL AND BRAKE DISCS
NOTE:
Tighten the brake disc bolts in stages and in a
crisscross pattern.
Brake disc bolt
23 Nm (2.3 mSkg)
LOCTITE
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjustment
steps until the brake disc deflection is within
specification.
f. If the brake disc deflection cannot be brought
within specification, replace the brake disc.
EAS00539
ASSEMBLING THE FRONT WHEEL
1. Install:
S wheel bearings
S oil seals
New
Install the new wheel bearings and oil seals
in the reverse order of disassembly.
CAUTION:
Do not contact the wheel bearing inner race
1 or balls 2 . Contact should be made only
with the outer race 3 .
NOTE:
Use a socket 4 that matches the diameter of
the wheel bearing outer race and oil seal.
EAS00544
INSTALLING THE FRONT WHEEL
The following procedure applies to both brake
discs.
1. Lubricate:
S wheel axle
S oil seals lips
Recommended lubricant
Lithium soap base grease
4-7
CHAS