Cable Routing - Yamaha XV1600A1999 Service Manual

EB206000

CABLE ROUTING

Throttle cable
1
Clutch cable
2
Left handlebar switch lead
3
Rectifier/ regulator lead
4
To engine
5
To rear brake light switch
6
Rear brake light switch lead
7
Front brake hose
8
Right handlebar switch lead
9
CABLE ROUTING
A Pull the wire harness into the inside of the head light from through the
hole on the back.
B Clamp the wire harness.
C Clamp the AIS vacuum hose.
D Route the rear brake light switch lead in front of the rectifier / regulator
bracket.
E Clamp the rear brake light switch lead to the rectifier / regulator lead
with a plastic band and cut the end of band.
2-32
SPEC