Checking The Pull Lever Shaft And Pull Rod; Checking The Primary Drive; Installing The Pickup Coil And Pull Lever Shaft - Yamaha XV1600A1999 Service Manual

CLUTCH
EAS00287
CHECKING THE PULL LEVER SHAFT AND
PULL ROD
1. Check:
S pull lever shaft pinion gear teeth a
S pull rod teeth b
Damage/wear ! Replace the pull lever
shaft and pull rod as a set.
2. Check:
S pull rod bearing
Damage/Replace.
EAS00292

CHECKING THE PRIMARY DRIVE

1. Check:
S primary drive gear 1
S primary driven gear 2
Damage/wear ! Replace the primary drive
gear and clutch housing as a set.
Excessive noise during operation ! Re-
place the primary drive gear and clutch hous-
ing as a set.
INSTALLING THE PICKUP COIL AND PULL
LEVER SHAFT
1. Apply
S sealant
(onto the pickup coil lead grommet)
Yamaha bond No.1215
90890-85505
2. Install:
S pickup coil
S pickup coil lead holder
NOTE:
Apply locking agent (LOCTITE ) to the threads
of the pickup coil bolts and pickup coil lead hold-
er bolts.
5-68
E
ENG
7 Nm (0.7 mSkg)
7 Nm (0.7 mSkg)