Assembling And Installing The Front Brake Master Cylinder - Yamaha YBR125ED 2005 Service Manual

1
a
2
FRONT BRAKE
3. Check:
• brake master cylinder reservoir cap
Cracks/damage → Replace.
• brake master cylinder reservoir diaphragm
• brake master cylinder reservoir diaphragm
holder
Damage/wear → Replace.
4. Check:
• brake hose
Cracks/damage/wear → Replace.
EAS00598
ASSEMBLING AND INSTALLING THE
FRONT BRAKE MASTER CYLINDER
WARNING
_
• Before installation, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.
• Never use solvents on internal brake
components.
Recommended brake fluid
DOT 3 or 4
1. Install:
• brake master cylinder 1
• brake master cylinder holder 2
NOTE:
_
• Install the brake master cylinder holder with
the "UP" mark facing up.
• Align the end of the brake master cylinder
holder with the punch mark a on the handle-
bar.
• First, tighten the upper bolt, then the lower
bolt.
4 - 26
CHAS
10 Nm (1.0 m · kg, 7.2 ft · lb)