Yamaha XV1600A1999 Service Manual page 127

INSTRUMENT FUNCTIONS
To reset the trip meter "0", push the set button
until it displays "TRIP A" or "TRIP B", then push
mode button and hold it down for at least one se-
cond.
NOTE:
This motorcycle does not have a tachometer.
However, it is equipped with an engine revolu-
tion limiter, which prevents the engine revolu-
tion from exceeding approximately 4,400 r/min.
Setting the clock
This clock always shows the time regardless of
the main switch position.
1. Turn the main switch to "ON".
2. Press both left and right buttons simulta-
neously until both hours and minutes flash.
1
3. Push the left button and the hour display will
flash. 2
4. Push the right button to change the hours. 3
5. Push the left button and the minute display
will flash. 4
6. Push the right button to change the minutes.
5
7. Push the left button and both hours and min-
utes will flash. 6
8. Push the right button for two seconds to set
the clock. 7
3-61
CHK
ADJ