Checking The Crankcase; Checking The Bearing And Oil Seal - Yamaha XV1600A1999 Service Manual

CRANKCASE
4. Remove:
S right crankcase
CAUTION:
S First check that the shift drum segment's
teeth then remove the right crankcase.
S Tap on one side of the crankcase with a
soft-face hammer. Tap only on reinforced
portions of the crankcase, not on the
crankcase mating surfaces. Work slowly
and carefully and make sure the crankcase
halves separate evenly.
EAS00399

CHECKING THE CRANKCASE

1. Thoroughly wash the crankcase halves in a
mild solvent.
2. Thoroughly clean all the gasket surfaces and
crankcase mating surfaces.
3. Check:
S crankcase
Cracks/damage ! Replace.
S oil delivery passages
Obstruction ! Blow out with compressed air.
EAS00401
CHECKING THE BEARINGS AND OIL SEAL
1. Check:
S bearings
Clean and lubricate the bearings, then rotate
the inner race with your finger.
Rough movement ! Replace.
2. Check:
S oil seal
Damage/wear ! Replace.
5-104
E
ENG