CRANKSHAFT AND CONNECTING RODS
6. Measure:
S crankshaft journal bearing inside diameter
a
Out of specification ! Replace the crank-
case assembly.
Crankshaft journal bearing inside
diameter
50.01
NOTE:
Measure the inside diameter of each crankshaft
bearing at two places.
7. Calculate:
S crankshaft
journal-to-crankshaft
bearing clearance
Out of specification ! Replace the crank-
shaft and crankshaft journal bearings as a
set.
NOTE:
Calculate the clearance by subtracting the
crankshaft journal diameter from the crankshaft
journal bearing inside diameter.
Crankshaft journal-to-crankshaft
Journal bearing clearance
0.030
INSTALLING THE CONNECTING RODS
1. Lubricate:
S bolt threads and seats
(with the recommended lubricant)
Recommended lubricant
Molybdenum disulfide grease
5-119
ENG
50.03 mm
journal
0.062 mm
E