Installing The Drive Belt And Drive Sprocket - Yamaha XV1600A1999 Service Manual

DRIVE BELT AND DRIVE SPROCKET
3. Check:
S drive sprocket
S rear wheel sprocket
Bent teeth ! Replace the drive belt and
sprockets as a set.
INSTALLING THE DRIVE BELT AND DRIVE
SPROCKET
1. Install:
S drive sprocket 1
S lock washer 2
S drive sprocket nut 3
2. Install:
S drive belt
CAUTION:
Install the drive belt facing the same way it
was removed.
3. Install:
S rear shock absorber and swingarm assem-
bly
Refer to "REAR SHOCK ABSORBER AND
SWINGARM".
S rear wheel
Refer to "REAR WHEEL, BRAKE DISC AND
SWINGARM".
4. Tighten:
S drive sprocket nut
NOTE:
When tightening the drive sprocket nut, press
down on the brake pedal so the drive sprocket
does not move.
5. Bend the lock washer tab along a flat side of
the nut.
4-92
CHAS
New
85 Nm (8.5 mSkg)
E