Yamaha XV1600A1999 Service Manual page 63

A Clamp the wireharness.
B Position the white tape on the wireharness with
the hole on battery box, as shown.
C Fix the wireharness negative lead coupler to
battery band.
D Set the wireharness regative lead protecter
between coupler and clamp.
E Route the sterter lead between battery box and
stay.
CABLE ROUTING
F Hang the thermo switch lead to the hook.
G Set the wireharness along a dent of stay.
H Pull the front flasher lead from through flasher
stay senter hole and pass on stay and pull the
front flasher lead into the inside of headlight from
through hole of headlight.
2-39
SPEC