Yamaha XV1600A1999 Service Manual page 432

Table of Contents

Advertisement

B
S Set the main switch to "ON".
S Set the turn signal switch to "L" or "R".
S Measure the voltage (12 V) of chocolate
or dark green
at the turn signal light con-
2
nectors (wire harness side) or the meter as-
sembly coupler.
S Is the voltage within specification?
YES
This circuit is OK.
EB806414
4. The neutral indicator light fails to come on.
1. Neutral indicator light bulb and socket
S Check the neutral indicator light bulb and
socket for continuity.
Refer to "CHECKING THE BULBS AND
BULB SOCKETS".
S Is the neutral indicator light bulb and socket
OK?
YES
SIGNALING SYSTEM
1
NO
The
wiring
circuit
from the turn signal
switch to the turn sig-
nal light connector or
the meter assembly
coupler are faulty
and must be re-
paired.
NO
Replace the neutral
indicator light bulb,
socket or both.
2. Neutral switch
S Check the neutral switch for continuity.
Refer to "CHECKING THE SWITCHES".
S Is the neutral switch OK?
YES
3. Voltage
S Connect the pocket tester (DC 20 V) to the
meter assembly coupler as shown.
Tester positive probe ! brown
Tester negative probe ! sky blue
S Set the main switch to "ON".
S Measure the voltage (12 V) of brown
sky blue
at the meter assembly coupler.
2
S Is the voltage within specification?
YES
This circuit is OK.
7-42
ELEC
NO
Replace the neutral
switch.
1
2
and
1
NO
The
wiring
circuit
from the main switch
to the meter assem-
bly coupler is faulty
and must be re-
paired.
E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xv1600al 1999

Table of Contents