Yamaha XV1600A1999 Service Manual page 261

CAMSHAFTS
5. Measure:
S crankcase hole inside diameter c
Out of specification ! Replace the crank-
case.
Crankcase hole inside diameter
25.000
6. Measure:
S camshaft caver hole inside diameter d
Out of specification ! Replace the camshaft
cover.
Camshaft cover hole inside diam-
eter
28.000
7. Calculate:
S camshaft-to-crankcase clearance
Out of specification ³ Replace the defective
part (-s).
NOTE:
Calculate the clearance by subtracting the
crankcase side camshaft journal diameter
(crankcase side) from the crankcase hole inside
diameter.
Camshaft to crankcase clearance
0.050
8. Calculate:
S camshaft-to-camshaft cover clearance
Out of specification ! Replace the defective
part(-s).
NOTE:
Calculate the clearance by subtracting the cam-
shaft journal diameter (camshaft cover side)
from the camshaft cover hole inside diameter.
Camshaft to camshaft cover cle-
arance
0.020
5-33
ENG
25.021 mm
28.021 mm
0.084 mm
0.054 mm