Yamaha XV1600A1999 Service Manual page 168

FRONT AND REAR BRAKES
4. Install:
S copper washers
S brake hose
S union bolt
WARNING
Proper brake hose routing is essential to in-
sure safe motorcycle operation. Refer to
"CABLE ROUTING".
NOTE:
S While holding the brake hose, tighten the
union bolt as shown.
S Turn the handlebar to the left and to the right to
make sure the brake hose does not touch oth-
er parts (e.g., wire harness, cables, leads).
Correct if necessary.
5. Install:
S brake lever spring 1
S brake lever 2
6. Connect:
S front brake light switch connectors 1
7. Fill
S brake master cylinder reservoir
(with the specified amount of the recom-
mended brake fluid)
4-38
CHAS
New
30 Nm (3.0 mSkg)
Recommended brake fluid
DOT 4