Modifying The Startup Configuration; Default Boot Configuration; Automatically Downloading A Configuration File - Cisco Catalyst 3560-X Software Configuration Manual

Modifying the Startup Configuration

Modifying the Startup Configuration
These sections describe how to modify the switch startup configuration:
•
•
•
•
•
See also
Images,"
section on page 1-16

Default Boot Configuration

Table 1-3
Table 1-3 Default Boot Configuration
Feature
Operating system software image
Configuration file

Automatically Downloading a Configuration File

You can automatically download a configuration file to your switch by using the DHCP-based
autoconfiguration feature. For more information, see the
Autoconfiguration" section on page
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
1-18
Default Boot Configuration, page 1-18
Automatically Downloading a Configuration File, page 1-18
Booting Manually, page 1-19
Booting a Specific Software Image, page 1-20
Controlling Environment Variables, page 1-21
Appendix 1, "Working with the Cisco IOS File System, Configuration Files, and Software
for information about switch configuration files. See the
for information about switch stack configuration files.
shows the default boot configuration.
Default Setting
The switch attempts to automatically boot up the system using information in the
BOOT environment variable. If the variable is not set, the switch attempts to load and
execute the first executable image it can by performing a recursive, depth-first search
throughout the flash file system.
The Cisco IOS image is stored in a directory that has the same name as the image file
(excluding the .bin extension).
In a depth-first search of a directory, each encountered subdirectory is completely
searched before continuing the search in the original directory.
Configured switches use the config.text file stored on the system board in flash
memory.
A new switch has no configuration file.
Chapter 1 Assigning the Switch IP Address and Default Gateway
"Understanding DHCP-Based
1-3.
"Switch Stack Configuration Files"
OL-25303-03