Ricoh MP C3004 Field Service Manual page 702

Hide thumbs Also See for MP C3004:
Table of Contents

Advertisement

4. Replacement and Adjustment
4. Make sure that there is no transmission standby file. If any standby file exists, ask the customer
to delete it or complete the transmission.
8.
Turn the power OFF and unplug the power supply cord.
9.
Push the power switch ON again to discharge the residual charge.
10.
Replace the NV-RAM with a brand-new one.
11.
Turn the power ON with the SD card to which the NV-RAM data has been uploaded in
Slot 2.
• SC673 appears at start-up, but this is normal behavior. This is because the controller and the
smart operation panel cannot communicate with each other due to changing the SP settings
for the operation panel.
12.
Change the SP settings for the operation panel.
If you switch the screen to enter the SP mode, SC995-02 is displayed. However, continue the
following steps.
• SP5-748-101: (OpePanel Setting: Op Type Action Setting): Change bit 0 from 0 to 1.
• SP5-748-201: (OpePanel Setting: Cheetah Panel Connect Setting): Change the value from 0
to 1.
13.
Change the Flair API SP values.
• SP5-752-001 (Copy FlairAPIFunction Setting): Change bit 0 from 0 to 1.
• SP1-041-001 (Scan:FlairAPI Setting): Change bit 0 from 0 to 1.
• SP3-301-001 (FAX:FlairAPI Setting) Change bit 0 from 0 to 1.
14.
Cycle the power OFF/ON.
• The model information is written on the NVRAM (Novita), so SC995-02 does not occur.
• Program/Change Administrator will be displayed in Japanese, but this is normal.
15.
Enter the SP mode and specify the following settings manually.
• a. SP5-985-001 (Device Setting: On Board NIC) Change the value from 0 to 1.
• b. SP5-985-002 (Device Setting: On Board USB) Change the value from 0 to 1.
16.
Turn OFF the main power, and then turn ON the main power with the SD card to which
the NV-RAM data has been uploaded in Slot 2.
17.
Download the NV-RAM data stored in the SD card to the brand-new NV-RAM using
SP5-825-001 (NV-RAM Data Download).
• The download will take a couple of minutes.
18.
Turn the power OFF and remove the SD card from slot 2.
694

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mp c4504Mp c3504Mp c5504Mp c6004

Table of Contents