Using Auto Erase Memory - Ricoh MP C3004 Field Service Manual

8. Exit the User Tools mode.
9. Check the display and make sure that the overwrite erase icon appears.
10. Check the overwrite erase icon.
The icon [1] is lit when there is temporary data to be overwritten, and blinks during overwriting.
The icon [2] is lit when there is no temporary data to be overwritten.

Using Auto Erase Memory

The Auto Erase Memory function can be enabled by the following procedure.
1. Log in as the machine administrator from the control panel.
2. Press the [User Tools] icon.
3. Press [Machine Features].
4. Press [System Settings].
5. Press [Administrator Tools].
This icon is lit when there is temporary data to be overwritten,
Icon [1]
and blinks during overwriting.
This icon is lit when there is no temporary data to be
Icon [2]
overwritten.
Security Settings
463