What To Do Before Replacing The Image Transfer Cleaning Unit - Ricoh MP C3004 Field Service Manual

Hide thumbs Also See for MP C3004:

Table of Contents

• When replacing the Image Transfer Cleaning Unit, do not touch the cleaning blade edge.

What to Do before Replacing the Image Transfer Cleaning Unit

Before replacing the Image Transfer Belt Cleaning, set SP3-701-102 to "1" and switch the power OFF.

Then replace the Image Transfer Belt Cleaning and switch the power ON.

SP3-701 (Manual New Unit Set)

This SP is the new unit detection flag.

0: new unit detection flag OFF, 1: new unit detection flag ON

Image Transfer Unit

Mp c4504 Mp c3504 Mp c5504 Mp c6004