• Reconnect the connector.
• Replace the sensor.
• Replace the Paper Transport IOB.
• Replace the harness.
Feeler for Paper Exit Full Sensor
Cause verification
Check if the feeler for paper full
detection is unfolded at the
operating position. (Check that it is
not folded.)
Check if the feeler for paper full
detection is unfastened.
Cannot print as paper full alert cannot be turned off
Target Part/SP No.:Paper Exit Full Sensor / SP5-803-012 (Tray Full Exit Sensor)
Cause verification
Execute an INPUT check when there is no paper at the
position of the referenced sensor.
Execute an INPUT check when there is paper at the
position of the referenced sensor.
Solution:
• Reconnect the connector.
• Replace the sensor.
• Replace the Paper Transport IOB.
• Replace the harness.
Feeler for Paper Exit Full Sensor
Check if the operation of the feeler for the paper exit full
sensor is prevented due to the presence of foreign
material.
Troubleshooting for Transport/Paper Feeding of the Machine
Problem Judgement
The feeler is not in the operating
position.
Feeler is unfastened.
1: Full
0: Not full
Remove the cause of the malfunction.
Solution
Unfold the feeler.
Reattach the feeler.
Problem Judgement
1133