Ricoh MP C3004 Field Service Manual page 464

2. Installation
Value
6 Communication error
8 Other error
9 Request number confirmation executing
11 Already registered
12 Parameter error
20 Dial-up authentication error
21 Answer tone detection error
22 Carrier detection error
23 Invalid setting value (modem)
24 Low power supply current
25 unplugged modem
26 Busy line
5. Make sure that the screen displays the Location Information with SP5-816-205 only when
it has been input at the Center GUI.
6. Click [EXECUTE] to execute the registration with SP5-816-206.
7. Check the registration result with SP5-816-207.
Value
0 Succeeded
1 Request number error
2 Already registered
3 Communication error (proxy enabled)
4 Communication error (proxy disabled)
5 Proxy error (Authentication error)
8 Other error
456
Meaning
Meaning
Solution/ Workaround
Check the network condition.
See "SP5816-208 Error Codes" below
this.
Processing... Please wait.
-
-
* These errors occur only in the modems
that support @Remote.
Solution/ Workaround
-
Check the request number again.
Check the registration status.
Check the network condition.
Check the network condition.
Check Proxy user name and password.
See "SP5-816-208 Error Codes" below
this.