Table of Contents
Advertisement
4. Replacement and Adjustment
Mounting position and orientation of the NVRAMs
Position
[A]
Left
[B]
Right
1.
Make sure that you have the SMC report (factory settings). This report comes with the
machine.
2.
Output all the SMC data using SP5-990-001 (SP Print Mode: All (Data List)), or download
the SMC data to an SD card using SP5-992-001 (SP Text mode: ALL (Data List))
Make sure to shut down and reboot the machine once before printing/exporting the SMC.
Otherwise, the latest settings may not be collected when the SMC is printed/exported.
3.
Turn the main power switch OFF.
4.
Insert an SD card into Slot 2 and turn the main power switch ON.
5.
Upload the NV-RAM data on the controller board to the SD card using SP5-824-001 (NV-
RAM Data Upload).
692
Label on the board
Label on the NVRAM
FRAM1
FRAM2
2M-1
2M-2
Advertisement
Table of Contents
Troubleshooting
