Table of Contents
Advertisement
2. Installation
How to change the setting of Staple Method for Stapleless Stapler
Use this procedure to select the type of stapling that is done by the stapleless stapler.
Note that if you change the finisher type from Internal Finisher SR3180 to Finisher SR3210, which has
the same type of stapleless staple unit, the current setting in [Stapling Method for Stapleless Stapler] is
not carried over, so configure the setting again.
1.
Press the [User Tools] icon on Home screen.
2.
Press [Machine Features] > [System Setting] > [General Setting] > [Stapling Method for
Stapleless Stapler].
3.
Select [Double] or [Single].
How to set Margin Erase for Stapleless Stapler
1.
Press the [User Tools] icon.
2.
Press [Machine Features] > [System Setting] > [General Setting].
280
Advertisement
Table of Contents
Troubleshooting
