Microhard Systems IP-921 Operating Manual page 86

6.0 Configuration
With one or more Repeaters
in the system, a network's
throughput is divided in half.
Exercising the option of back-
to-back ‗Repeaters' - which
requires 2 IP Series at a
‗Repeater' site - eliminates
the division of bandwidth.
If there is more than one
Repeater in a network, the
R e p e a t e r s s h o u l d
‗registered'. See ‗Repeater
Registration' further along in
this section re
accomplish this.
© Microhard Systems Inc.
This setting applies to the Master only.
The default value is No, stating there are no Repeaters in the
network.
If there are 1 or more Repeaters in the network, configure this
setting as Yes.
b e
how to
CONFIDENTIAL
IP9xx Series
Repeater
Values
No
Yes
86