Microhard Systems IP-921 Operating Manual page 60

6.0 Configuration
Prior to enabling this service,
verify that there are no other
devices - either wired (e.g.
LAN) or wireless (e.g. another
IP Series) with an active
DHCP SERVER service.
(The Server issues
address information at the
request of a DHCP Client,
w h i c h r e c e i v e s
information.)
© Microhard Systems Inc.
Image 6J: Network Configuration, DHCP Server Config. Submenu
Choose to enable or disabled the DHCP Server service. Note that
there can only be one such service residing on a network segment -
otherwise, duplicate IP addresses could be assigned and exist on a
network, which would result in problems. Devices on the network,
which are intended to receive IP address information from this
DHCP Server, must have their local IP settings set for ‗DHCP' (as
opposed to ‗static')
IP
t h e
CONFIDENTIAL
IP9xx Series
Server Status
Values
Disable
Disable
Enable
60