Microhard Systems IP-921 Operating Manual page 108

6.0 Configuration
© Microhard Systems Inc.
6.1.7.1 Admin Password Configuration
To keep a system secure, the Administrator Password (which is
prompted-for at the LogOn window) should be modified rather than
retaining the factory default value of ‗admin'.
Image 6X: Security Config., Admin Password Config. Submenu
Do not forget the admin password as, if lost, it cannot be recovered.

Submit
Write parameter values into IP Series memory.

Reset
Restore ‗currently' modified parameter values to those
which were previously written into IP Series memory.
CONFIDENTIAL
IP9xx Series
New Password/Repeat Password
Values
character string
admin
Soft Buttons
108