Microhard Systems IP-921 Operating Manual page 80

6.0 Configuration
Change the default value for
the Network
something unique for your
network. Do this for an added
measure of security and to
differentiate your
from others which may be
operating nearby.
© Microhard Systems Inc.
All IP Series in a given network must have the same Network
Namw. This unique network address is not only a security feature
for a particular network, but also allows other networks - with their
own unique network address - to operate in the same area without
the possibility of undesired data exchange between networks.
Referring to the Network Profile configuration (detailed previously in
Name to
this section), the Network Name can also be used as the single
parameter to change when a Remote is to 'switch' from operating
between distinct networks.
network
The Network Name is also taken into consideration in the frequency
hopping algorithm: change the Network Name and the hopping
pattern will change.
This is the RF communications Link Rate. A lower link rate offers
better receive sensitivity performance; a higher link rate, better
throughput. All IP Series in a network must use the same Link
Rate.
Authentication Key (continued)
CONFIDENTIAL
IP9xx Series
Values
Public
Character string
Network Name
Values
default is model-dependent
character string
Link Rate
Values
default value and available
rate(s) are model-dependent
80