Table of Contents
Advertisement
8.1
Firmware Updating with USB Media
Firmware can be updated by storing update programs and firmware data files in the USB media.
Note:
When the update is performed, use the latest program.
Program necessary for updating
Update program
Update program loader
Model specific update program
Firmware type and data file name for updating
Equipment
Firmware
Master data
System ROM
Engine ROM
Scanner ROM
Options
Firmware
Imaging Acceleration
Board ROM
Store the update program loader (mentusb2.o) in the root directory, and store the model specific update
program (dlFirmWare_2820C_3530C) and the data file for updating in the model specific folder.
Model specific folder name
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Data file name
mentusb2.o
dlFirmWare_2820C_3530C
Stored
Hard disk
hdd.bin
System control PC
firmImage0.bin
board
(SYS board)
Logic PC board
T450MWW.xxx
(LGC board)
*
Scanning section
T450SLGWW.xxx
control PC board
*
(SLG board)
Stored
Imaging Acceleration
T450IWW.xxx
Board (MEP board)
*
USB media
mentusb2.o
2820C_3530C
dlFirmWare_2820C_3530C
firmImage0.bin
hdd.bin
T450MWW.xxx
T450SLGWW.xxx
T450IWW.xxx
Fig. 8-1
8 - 5
An error occurs at a time of the [4] + [9]
startup, unless this program is stored in
the USB media.
*
Be sure to save this data file to the
root directory of the USB media.
An error occurs at a time of the [4] + [9]
startup, unless this program is stored in
the USB media.
Data file name
xxx is version.
xxx is version.
Data file name
xxx is version.
2820C_3530C
e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
Remarks
Remarks
HDD program data,
System firmware,
UI data
OS data
Main firmware
Scanner firmware
Remarks
Imaging Acceleration
Board firmware
FIRMWARE UPDATING
8
Advertisement
Table of Contents
