Assign Speed Dialling Blocks - Samsung iDCS100 System Administration Manual

Samsung iDCS100
ACTION
1. Press Transfer (or TRSF) 106
Display shows
2. Dial the station number (e.g., 205) OR
press the VOLUME keys to select the station
and press the right soft key to move the
cursor
If the selected station has no speed dial
bins, this display will be shown and a
new station may be selected
3. Dial the speed dial location (e.g., 05) OR
press the VOLUME keys to scroll through the
speed dial numbers and use the right soft
key to move the cursor
4. Enter the name using the procedure described
in Program Station Names
5. Press the F key to return to
Speed Dial Numbers For Stations
OR press the right soft key to return to step 2
OR press the left soft key to return to step 3
OR press Transfer (or TRSF) to store and exit programming
OR press SPEAKER to store and advance to the
next program

• ASSIGN SPEED DIALLING BLOCKS

[MMC 606]
Your system can have up to 1500 speed dial entries assigned. Up to 500 of these can
be allocated as system speed dials, and the remainder allocated to stations as per-
sonal speed dials, with a maximum of 50 numbers per station. Consequently, the more
system speed dials that are allocated, the fewer speed dials are available for personal
use. When assigning speed dials, this MMC displays the number of system or personal
blocks that are currently assigned and also shows the number remaining to be as-
signed, called the 'Free List'. This program also allows you to delete blocks of speed
dial if required.
Open customer programming and follow these instructions.
ACTION
1. Press Transfer (or TRSF) 606
Display shows
2. Press right soft key to advance cursor
22
Program Personal
System Administration Guide
DISPLAY
[201] SPEED NAME
00 :
[205] SPEED NAME
00 :
[205] SPEED DIAL
SPDBLK NOT EXIST
[205] SPEED NAME
05 : _
[205] SPEED NAME
05 : SAM SMITH
DISPLAY
FREE LIST : 60
SYSTEM : 20