Identifying Port Location - NEC ux5000 Hardware Manual

Chapter 3 - Installing Extensions and Trunks
3.14.2

Identifying Port Location

Port information such as blade type, port numbers, blade status, and individual port status can be obtained
from the UX5000. To obtain a System Report containing blade information, a USB flash drive must be
connected to the UX5000's USB port on the CCPU or an Aspire CTA or CTU adapter must be used.
Running program 90-13-03 in MAINTENANCE PROGRAMS prints a system blade report. Refer to Program
90-13-03 : System Information Output in the Software Manual. The following is a typical report:
<<SYSTEM INFORMATION>>
slot
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
3 - 28
location type
1-1 ESIU
1-2 ESIU
1-3 SLIU
1-4 COIU
1-5 COIU
1-6 DIOPU
1-7 - none -
1-8 - none -
2-1 - none -
2-2 - none -
2-3 - none -
2-4 - none -
2-5 - none -
2-6 - none -
2-7 - none -
2-8 - none -
assign port condition
1- 16 Running
1- 8 Running
1- 8 Running
1- 16 Running
1- 16 Running
1- 8 Not Install
01/03/03 09:49
note
****---- -------- Connect:*
Chapter 3