NEC ux5000 Hardware Manual page 226

Chapter 4 - Terminals and Optional Equipment
14. The back of the 2PGDAD module has two key-hole type openings. Place the 2PGDAD module over the
two screws and slide it down or over (depending on the positioning) to lock it in place.
15. Refer to the specific function within this section for which the 2PGDAD module is being used (ACI,
Paging, MOH) for additional information. Also, be sure to program the device as described in the
UX5000 Feature Manual (P/N 0913201).
4 - 8
Protruding
screws
Figure 4-8: WALL MOUNTING THE 2PGDAD MODULE
Protruding
screws
Chapter 4