Installing Extensions And Trunks; Connectors - NEC ux5000 Hardware Manual

Hide thumbs Also See for ux5000:

Table of Contents

Chapter 3 - Installing Extensions and Trunks

Chapter 3 - Installing Extensions

The UX5000 system uses a combination of RJ-61 and RJ-45 connectors for interfacing with the blades. The

RJ-61 connectors are used for the telecommunications devices (terminals, trunks, etc.) and the RJ-45

connectors are used for LAN interfacing. Refer to the sections below for pin-out details.

Install analog/digital terminals as on-premise extensions only.

(Otherwise, the terminals are highly susceptible to lightning strikes.)

Figure 3-1: CABLE LAYOUT

! Important !

Troubleshooting