NEC ux5000 Hardware Manual page 266

Chapter 4 - Terminals and Optional Equipment
5.
6.
7.
8.
4 - 48
Install the adapter on the bottom of the terminal
Figure 4-25: INSTALL THE ADA ADAPTER
Return the terminal to an upright position and reconnect all the cables.
Connect the stereo mini-jack wire between the ADA and the cassette recorder or audio input.
When recording using the LINE IN jack on a cassette recorder, disp switch 5 needs to
●
be off. When using the MIC jack on a cassette recorder, switch 5 must be set to on.
Make sure to connection the cable to the audio input (for example, on the PC's sound
●
card). Plugging the adapter into any other connector may damage the ADA adapter.
Check Program 10-03-04 or 10-03-05 to make sure the system recognizes the ADA adapter.
To remove the adapter, push the right and left tabs to release.
●
To avoid any hardware problems, when removing the adapter, first unplug the line cord,
●
then the power cord, then any other adapter cables.
Chapter 4