NEC ux5000 Hardware Manual page 31

6.
7.
Chapter 1
The metal bracket is placed on top of the batteries to hold them in place. Insert the metal tabs
of the bracket into the slots on the side of the battery compartment and lower into place. Using
the two screws provided, attach the bracket to the battery compartment.
Figure 1-20: ATTACH BRACKET WITH SCREWS
Insert the battery cable through the slot on the battery compartment and connect the battery
cable to the connection points on the battery compartment.
Figure 1-21: ATTACH BATTERY CABLE TO CONNECTORS
Chapter 1 - Installing the Chassis
1 - 19