Blade Installation And Startup; Blade Layout; Blade Location - NEC UX5000 Hardware Manual

Chapter 2 - Blade Installation and Startup
Chapter 2 - Blade Installation
S 2-1
ECTION

BLADE LAYOUT

2.1.1

Blade Location

Determine the slot position for each blade. In the Controlling chassis:
●
Slot 1 - dedicated for the CCPU
●
EXIFU slot - dedicated for the Expansion blade
In the Expansion Chassis:
●
EXIFU slot - dedicated for the Expansion blade
The Controlling/Base and Expansion Chassis:
●
Slots 2-16 are universal (any type of blade can be installed)
•
•
Chapter 2
Make sure to follow the steps indicated in
Installation
(page 2-87) for an initial system install. This will ensure that you start the
system with the default system settings.
To delete a blade from the system, the blade must first be removed from the system
chassis, then Program 90-05-01 can be used to delete the slot definition.
and Startup
Important Notes
Powering Up the System/Initial Blade
2 - 1